dotfiles

;; -*- mode: emacs-lisp; lexical-binding: t -*-
;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.

(defun dotspacemacs/layers ()
  "Layer configuration:
This function should only modify configuration layer settings."
  (setq-default
   ;; Base distribution to use. This is a layer contained in the directory
   ;; `+distribution'. For now available distributions are `spacemacs-base'
   ;; or `spacemacs'. (default 'spacemacs)
   dotspacemacs-distribution 'spacemacs

   ;; Lazy installation of layers (i.e. layers are installed only when a file
   ;; with a supported type is opened). Possible values are `all', `unused'
   ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
   ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
   ;; lazy install any layer that support lazy installation even the layers
   ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
   ;; installation feature and you have to explicitly list a layer in the
   ;; variable `dotspacemacs-configuration-layers' to install it.
   ;; (default 'unused)
   dotspacemacs-enable-lazy-installation 'unused

   ;; If non-nil then Spacemacs will ask for confirmation before installing
   ;; a layer lazily. (default t)
   dotspacemacs-ask-for-lazy-installation t

   ;; List of additional paths where to look for configuration layers.
   ;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
   ;; dotspacemacs-configuration-layer-path '("~/.spacemacs-contrib/")
   dotspacemacs-configuration-layer-path '()

   ;; List of configuration layers to load.
   dotspacemacs-configuration-layers
   '(csv
     ;; ----------------------------------------------------------------
     ;; Example of useful layers you may want to use right away.
     ;; Uncomment some layer names and press  (Vim style) or
     ;;  (Emacs style) to install them.
     ;; ----------------------------------------------------------------
     auto-completion
     better-defaults
     emacs-lisp
     c-c++
     csv
     elm
     git
     github
     haskell
     lua
     shell-scripts
     purescript
     puppet
     ansible
     markdown
     notmuch
     (org :variables
          org-enable-epub-support t
          org-enable-org-journal-support t
          org-enable-hugo-support t
          org-enable-bootstrap-support t)
     org-roam
     python
     clojure
     html
     go
     javascript
     react
     mu4e
     (shell :variables
            shell-default-height 30
            shell-default-position 'bottom)
     rust
     sql
     groovy
     major-modes ;; this used to be called 'extra-langs'
     syntax-checking
     version-control
     yaml
     chrome
     xkcd
     typescript
     prettier
     docker
     restclient
     epub
     finance
     terraform
     (spell-checking :variables spell-checking-enable-by-default nil))
   ;; List of additional packages that will be installed without being
   ;; wrapped in a layer. If you need some configuration for these
   ;; packages, then consider creating a layer. You can also put the
   ;; configuration in `dotspacemacs/user-config'.
   ;; To use a local version of a package, use the `:location' property:
   ;; '(your-package :location "~/path/to/your-package/")
   ;; Also include the dependencies as they will not be resolved automatically.
   dotspacemacs-additional-packages '()

   ;; A list of packages that cannot be updated.
   dotspacemacs-frozen-packages '()

   ;; A list of packages that will not be installed and loaded.
   dotspacemacs-excluded-packages '()

   ;; Defines the behaviour of Spacemacs when installing packages.
   ;; Possible values are `used-only', `used-but-keep-unused' and `all'.
   ;; `used-only' installs only explicitly used packages and deletes any unused
   ;; packages as well as their unused dependencies. `used-but-keep-unused'
   ;; installs only the used packages but won't delete unused ones. `all'
   ;; installs *all* packages supported by Spacemacs and never uninstalls them.
   ;; (default is `used-only')
   dotspacemacs-install-packages 'used-only))

(defun dotspacemacs/init ()
  "Initialization:
This function is called at the very beginning of Spacemacs startup,
before layer configuration.
It should only modify the values of Spacemacs settings."
  ;; This setq-default sexp is an exhaustive list of all the supported
  ;; spacemacs settings.
  (setq-default
   ;; If non-nil then enable support for the portable dumper. You'll need
   ;; to compile Emacs 27 from source following the instructions in file
   ;; EXPERIMENTAL.org at to root of the git repository.
   ;; (default nil)
   dotspacemacs-enable-emacs-pdumper nil

   ;; Name of executable file pointing to emacs 27+. This executable must be
   ;; in your PATH.
   ;; (default "emacs")
   dotspacemacs-emacs-pdumper-executable-file "emacs"

   ;; Name of the Spacemacs dump file. This is the file will be created by the
   ;; portable dumper in the cache directory under dumps sub-directory.
   ;; To load it when starting Emacs add the parameter `--dump-file'
   ;; when invoking Emacs 27.1 executable on the command line, for instance:
   ;;   ./emacs --dump-file=~/.emacs.d/.cache/dumps/spacemacs.pdmp
   ;; (default spacemacs.pdmp)
   dotspacemacs-emacs-dumper-dump-file "spacemacs.pdmp"

   ;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
   ;; possible. Set it to nil if you have no way to use HTTPS in your
   ;; environment, otherwise it is strongly recommended to let it set to t.
   ;; This variable has no effect if Emacs is launched with the parameter
   ;; `--insecure' which forces the value of this variable to nil.
   ;; (default t)
   dotspacemacs-elpa-https t

   ;; Maximum allowed time in seconds to contact an ELPA repository.
   ;; (default 5)
   dotspacemacs-elpa-timeout 5

   ;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
   ;; This is an advanced option and should not be changed unless you suspect
   ;; performance issues due to garbage collection operations.
   ;; (default '(100000000 0.1))
   dotspacemacs-gc-cons '(100000000 0.1)

   ;; If non-nil then Spacelpa repository is the primary source to install
   ;; a locked version of packages. If nil then Spacemacs will install the
   ;; latest version of packages from MELPA. (default nil)
   dotspacemacs-use-spacelpa nil

   ;; If non-nil then verify the signature for downloaded Spacelpa archives.
   ;; (default t)
   dotspacemacs-verify-spacelpa-archives t

   ;; If non-nil then spacemacs will check for updates at startup
   ;; when the current branch is not `develop'. Note that checking for
   ;; new versions works via git commands, thus it calls GitHub services
   ;; whenever you start Emacs. (default nil)
   dotspacemacs-check-for-update nil

   ;; If non-nil, a form that evaluates to a package directory. For example, to
   ;; use different package directories for different Emacs versions, set this
   ;; to `emacs-version'. (default 'emacs-version)
   dotspacemacs-elpa-subdirectory 'emacs-version

   ;; One of `vim', `emacs' or `hybrid'.
   ;; `hybrid' is like `vim' except that `insert state' is replaced by the
   ;; `hybrid state' with `emacs' key bindings. The value can also be a list
   ;; with `:variables' keyword (similar to layers). Check the editing styles
   ;; section of the documentation for details on available variables.
   ;; (default 'vim)
   dotspacemacs-editing-style 'vim

   ;; Specify the startup banner. Default value is `official', it displays
   ;; the official spacemacs logo. An integer value is the index of text
   ;; banner, `random' chooses a random text banner in `core/banners'
   ;; directory. A string value must be a path to an image format supported
   ;; by your Emacs build.
   ;; If the value is nil then no banner is displayed. (default 'official)
   dotspacemacs-startup-banner 'official

   ;; List of items to show in startup buffer or an association list of
   ;; the form `(list-type . list-size)`. If nil then it is disabled.
   ;; Possible values for list-type are:
   ;; `recents' `bookmarks' `projects' `agenda' `todos'.
   ;; List sizes may be nil, in which case
   ;; `spacemacs-buffer-startup-lists-length' takes effect.
   dotspacemacs-startup-lists nil
   ;; True if the home buffer should respond to resize events.
   dotspacemacs-startup-buffer-responsive t

   ;; Default major mode for a new empty buffer. Possible values are mode
   ;; names such as `text-mode'; and `nil' to use Fundamental mode.
   ;; (default `text-mode')
   dotspacemacs-new-empty-buffer-major-mode 'text-mode

   ;; Default major mode of the scratch buffer (default `text-mode')
   dotspacemacs-scratch-mode 'text-mode

   ;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
   ;; (default nil)
   dotspacemacs-initial-scratch-message nil

   ;; List of themes, the first of the list is loaded when spacemacs starts.
   ;; Press `SPC T n' to cycle to the next theme in the list (works great
   ;; with 2 themes variants, one dark and one light)
   dotspacemacs-themes '(solarized-dark
                         solarized-light)

   ;; Set the theme for the Spaceline. Supported themes are `spacemacs',
   ;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The
   ;; first three are spaceline themes. `doom' is the doom-emacs mode-line.
   ;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes,
   ;; refer to the DOCUMENTATION.org for more info on how to create your own
   ;; spaceline theme. Value can be a symbol or list with additional properties.
   ;; (default '(spacemacs :separator wave :separator-scale 1.5))
   dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5)

   ;; If non-nil the cursor color matches the state color in GUI Emacs.
   ;; (default t)
   dotspacemacs-colorize-cursor-according-to-state t
   ;; Default font. `powerline-scale' allows to quickly tweak the mode-line
   ;; size to make separators look not too crappy.
   dotspacemacs-default-font '("Monoid"
                               :size 14
                               :weight normal
                               :width normal)

   ;; The leader key (default "SPC")
   dotspacemacs-leader-key "SPC"

   ;; The key used for Emacs commands `M-x' (after pressing on the leader key).
   ;; (default "SPC")
   dotspacemacs-emacs-command-key "SPC"

   ;; The key used for Vim Ex commands (default ":")
   dotspacemacs-ex-command-key ":"

   ;; The leader key accessible in `emacs state' and `insert state'
   ;; (default "M-m")
   dotspacemacs-emacs-leader-key "M-m"

   ;; Major mode leader key is a shortcut key which is the equivalent of
   ;; pressing ` m`. Set it to `nil` to disable it. (default ",")
   dotspacemacs-major-mode-leader-key ","

   ;; Major mode leader key accessible in `emacs state' and `insert state'.
   ;; (default "C-M-m")
   dotspacemacs-major-mode-emacs-leader-key "C-M-m"
   ;; The command key used for Evil commands (ex-commands) and
   ;; Emacs commands (M-x).
   ;; By default the command key is `:' so ex-commands are executed like in Vim
   ;; with `:' and Emacs commands are executed with ` :'.
   dotspacemacs-ex-command-key ";"
   dotspacemacs-emacs-command-key "SPC"
   dotspacemacs-emacs-leader-key "M-m"

   ;; These variables control whether separate commands are bound in the GUI to
   ;; the key pairs `C-i', `TAB' and `C-m', `RET'.
   ;; Setting it to a non-nil value, allows for separate commands under `C-i'
   ;; and TAB or `C-m' and `RET'.
   ;; In the terminal, these pairs are generally indistinguishable, so this only
   ;; works in the GUI. (default nil)
   dotspacemacs-distinguish-gui-tab nil
   ;; If non nil `Y' is remapped to `y$' in Evil states. (default nil)
   dotspacemacs-remap-Y-to-y$ t
   ;; If non-nil, the shift mappings `<' and `>' retain visual state if used
   ;; there. (default t)
   dotspacemacs-retain-visual-state-on-shift t
   ;; If non-nil, J and K move lines up and down when in visual mode.
   ;; (default nil)
   dotspacemacs-visual-line-move-text nil
   ;; If non nil, inverse the meaning of `g' in `:substitute' Evil ex-command.
   ;; (default nil)
   dotspacemacs-ex-substitute-global nil
   ;; Name of the default layout (default "Default")
   dotspacemacs-default-layout-name "Default"

   ;; If non-nil the default layout name is displayed in the mode-line.
   ;; (default nil)
   dotspacemacs-display-default-layout nil

   ;; If non-nil then the last auto saved layouts are resumed automatically upon
   ;; start. (default nil)
   dotspacemacs-auto-resume-layouts nil

   ;; If non-nil, auto-generate layout name when creating new layouts. Only has
   ;; effect when using the "jump to layout by number" commands. (default nil)
   dotspacemacs-auto-generate-layout-names nil

   ;; Size (in MB) above which spacemacs will prompt to open the large file
   ;; literally to avoid performance issues. Opening a file literally means that
   ;; no major mode or minor modes are active. (default is 1)
   dotspacemacs-large-file-size 1

   ;; Location where to auto-save files. Possible values are `original' to
   ;; auto-save the file in-place, `cache' to auto-save the file to another
   ;; file stored in the cache directory and `nil' to disable auto-saving.
   ;; (default 'cache)
   dotspacemacs-auto-save-file-location 'cache

   ;; Maximum number of rollback slots to keep in the cache. (default 5)
   dotspacemacs-max-rollback-slots 5

   ;; If non-nil, the paste transient-state is enabled. While enabled, after you
   ;; paste something, pressing `C-j' and `C-k' several times cycles through the
   ;; elements in the `kill-ring'. (default nil)
   dotspacemacs-enable-paste-transient-state nil

   ;; Which-key delay in seconds. The which-key buffer is the popup listing
   ;; the commands bound to the current keystroke sequence. (default 0.4)
   dotspacemacs-which-key-delay 0.4

   ;; Which-key frame position. Possible values are `right', `bottom' and
   ;; `right-then-bottom'. right-then-bottom tries to display the frame to the
   ;; right; if there is insufficient space it displays it at the bottom.
   ;; (default 'bottom)
   dotspacemacs-which-key-position 'bottom

   ;; Control where `switch-to-buffer' displays the buffer. If nil,
   ;; `switch-to-buffer' displays the buffer in the current window even if
   ;; another same-purpose window is available. If non-nil, `switch-to-buffer'
   ;; displays the buffer in a same-purpose window even if the buffer can be
   ;; displayed in the current window. (default nil)
   dotspacemacs-switch-to-buffer-prefers-purpose nil

   ;; If non-nil a progress bar is displayed when spacemacs is loading. This
   ;; may increase the boot time on some systems and emacs builds, set it to
   ;; nil to boost the loading time. (default t)
   dotspacemacs-loading-progress-bar t

   ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
   ;; (Emacs 24.4+ only)
   dotspacemacs-fullscreen-at-startup nil

   ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
   ;; Use to disable fullscreen animations in OSX. (default nil)
   dotspacemacs-fullscreen-use-non-native nil

   ;; If non-nil the frame is maximized when Emacs starts up.
   ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
   ;; (default nil) (Emacs 24.4+ only)
   dotspacemacs-maximized-at-startup nil

   ;; If non-nil the frame is undecorated when Emacs starts up. Combine this
   ;; variable with `dotspacemacs-maximized-at-startup' in OSX to obtain
   ;; borderless fullscreen. (default nil)
   dotspacemacs-undecorated-at-startup nil

   ;; A value from the range (0..100), in increasing opacity, which describes
   ;; the transparency level of a frame when it's active or selected.
   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
   dotspacemacs-active-transparency 90

   ;; A value from the range (0..100), in increasing opacity, which describes
   ;; the transparency level of a frame when it's inactive or deselected.
   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
   dotspacemacs-inactive-transparency 90

   ;; If non-nil show the titles of transient states. (default t)
   dotspacemacs-show-transient-state-title t

   ;; If non-nil show the color guide hint for transient state keys. (default t)
   dotspacemacs-show-transient-state-color-guide t

   ;; If non-nil unicode symbols are displayed in the mode line.
   ;; If you use Emacs as a daemon and wants unicode characters only in GUI set
   ;; the value to quoted `display-graphic-p'. (default t)
   dotspacemacs-mode-line-unicode-symbols t

   ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
   ;; scrolling overrides the default behavior of Emacs which recenters point
   ;; when it reaches the top or bottom of the screen. (default t)
   dotspacemacs-smooth-scrolling t

   ;; Control line numbers activation.
   ;; If set to `t', `relative' or `visual' then line numbers are enabled in all
   ;; `prog-mode' and `text-mode' derivatives. If set to `relative', line
   ;; numbers are relative. If set to `visual', line numbers are also relative,
   ;; but lines are only visual lines are counted. For example, folded lines
   ;; will not be counted and wrapped lines are counted as multiple lines.
   ;; This variable can also be set to a property list for finer control:
   ;; '(:relative nil
   ;;   :visual nil
   ;;   :disabled-for-modes dired-mode
   ;;                       doc-view-mode
   ;;                       markdown-mode
   ;;                       org-mode
   ;;                       pdf-view-mode
   ;;                       text-mode
   ;;   :size-limit-kb 1000)
   ;; When used in a plist, `visual' takes precedence over `relative'.
   ;; (default nil)
   dotspacemacs-line-numbers 'relative
   ;; Code folding method. Possible values are `evil' and `origami'.
   ;; (default 'evil)
   dotspacemacs-folding-method 'evil

   ;; If non-nil `smartparens-strict-mode' will be enabled in programming modes.
   ;; (default nil)
   dotspacemacs-smartparens-strict-mode nil

   ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
   ;; over any automatically added closing parenthesis, bracket, quote, etc...
   ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
   dotspacemacs-smart-closing-parenthesis nil

   ;; Select a scope to highlight delimiters. Possible values are `any',
   ;; `current', `all' or `nil'. Default is `all' (highlight any scope and
   ;; emphasis the current one). (default 'all)
   dotspacemacs-highlight-delimiters 'all

   ;; If non-nil, start an Emacs server if one is not already running.
   ;; (default nil)
   dotspacemacs-enable-server nil

   ;; Set the emacs server socket location.
   ;; If nil, uses whatever the Emacs default is, otherwise a directory path
   ;; like \"~/.emacs.d/server\". It has no effect if
   ;; `dotspacemacs-enable-server' is nil.
   ;; (default nil)
   dotspacemacs-server-socket-dir nil

   ;; If non-nil, advise quit functions to keep server open when quitting.
   ;; (default nil)
   dotspacemacs-persistent-server nil

   ;; List of search tool executable names. Spacemacs uses the first installed
   ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
   ;; (default '("rg" "ag" "pt" "ack" "grep"))
   dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")

   ;; Format specification for setting the frame title.
   ;; %a - the `abbreviated-file-name', or `buffer-name'
   ;; %t - `projectile-project-name'
   ;; %I - `invocation-name'
   ;; %S - `system-name'
   ;; %U - contents of $USER
   ;; %b - buffer name
   ;; %f - visited file name
   ;; %F - frame name
   ;; %s - process status
   ;; %p - percent of buffer above top of window, or Top, Bot or All
   ;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
   ;; %m - mode name
   ;; %n - Narrow if appropriate
   ;; %z - mnemonics of buffer, terminal, and keyboard coding systems
   ;; %Z - like %z, but including the end-of-line format
   ;; (default "%I@%S")
   dotspacemacs-frame-title-format "%I@%S"

   ;; Format specification for setting the icon title format
   ;; (default nil - same as frame-title-format)
   dotspacemacs-icon-title-format nil

   ;; Delete whitespace while saving buffer. Possible values are `all'
   ;; to aggressively delete empty line and long sequences of whitespace,
   ;; `trailing' to delete only the whitespace at end of lines, `changed' to
   ;; delete only whitespace for changed lines or `nil' to disable cleanup.
   ;; (default nil)
   dotspacemacs-whitespace-cleanup nil))

(defun dotspacemacs/user-env ()
  "Environment variables setup.
This function defines the environment variables for your Emacs session. By
default it calls `spacemacs/load-spacemacs-env' which loads the environment
variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'.
See the header of this file for more information."
  (spacemacs/load-spacemacs-env))

(defun dotspacemacs/user-init ()
  "Initialization for user code:
This function is called immediately after `dotspacemacs/init', before layer
configuration.
It is mostly for variables that should be set before packages are loaded.
If you are unsure, try setting them in `dotspacemacs/user-config' first."

  (setq solarized-use-variable-pitch nil)
  ; (setq solarized-scale-org-headlines nil)

  (setq-default auto-fill-function 'do-auto-fill)
  (setq-default fill-column 79)

  ;; Commit message body should be filled to 72
  (setq git-commit-fill-column 72)

  ;; Window numbering should start from "1" for each new frame.
  (setq-default winum-scope 'frame-local)

  ;; JS

  (setq-default
   ;; js2-mode
   js2-basic-offset 2
   ;; web-mode
   css-indent-offset 2
   ;; json
   js-indent-level 2
   web-mode-markup-indent-offset 2
   web-mode-css-indent-offset 2
   web-mode-code-indent-offset 2
   web-mode-attr-indent-offset 2)

  (add-hook 'js2-mode-hook 'js2-mode-toggle-warnings-and-errors)

  ;; Golang
  (setq go-format-before-save t)

  ;; Clojure

  (add-hook 'clojure-mode-hook 'paredit-mode)

  ;; HTML & Django

  (setq web-mode-engines-alist
        '(("django" . "\\.html\\.")))

  ;; Haskell & stack
  ;; http://www.rnowak.info/2015/10/getting-started-with-haskell-stack-and.html?m=1

  (add-hook 'haskell-mode-hook 'turn-on-haskell-indentation)
  (add-to-list 'exec-path "~/.local/bin/"))

(defun dotspacemacs/user-load ()
  "Library to load while dumping.
This function is called only while dumping Spacemacs configuration. You can
`require' or `load' the libraries of your choice that will be included in the
dump."
  )

(defun dotspacemacs/user-config ()
  "Configuration function for user code.
  This function is called at the very end of Spacemacs initialization after
  layers configuration. You are free to put any user code."

  (define-key evil-normal-state-map (kbd "Q") (kbd "gqip"))
  (setq sentence-end-double-space t)

  (add-to-list 'auto-mode-alist '("\\.sls\\'" . yaml-mode))

  (with-eval-after-load 'org
    (setq org-capture-templates
      '(("t" "TODO entry human" entry
         (file+headline "~/Dropbox/org/inbox.org" "Tasks")
         "* TODO %i%? \n %U"
         )))

    (setq org-agenda-custom-commands
      '(("o" "At the office" tags-todo "@office"
         ((org-agenda-overriding-header "Office")))))

    (setq org-refile-targets
      '(("~/Dropbox/org/gtd.org" :maxlevel . 3)
        ("~/Dropbox/org/someday.org" :level . 1)
        ("~/Dropbox/org/tickler.org" :maxlevel . 2)))

    (setq org-agenda-files '("~/Dropbox/org/inbox.org"
                             "~/Dropbox/org/gtd.org"
                             "~/Dropbox/org/tickler.org"))

    (setq org-default-notes-file "~/Dropbox/org/inbox.org")
    (setq org-roam-directory "~/Dropbox/org/")

    ;; (add-hook 'org-mode-hook 'org-roam-mode)
    ;; (add-hook 'after-init-hook 'org-roam--build-cache-async)

    ;; (defun org-journal-today ()
    ;;   (interactive)
    ;;   (org-journal-new-entry t))

    (setq org-journal-date-prefix "#+TITLE: ")
    (setq org-journal-file-format "%Y-%m-%d-journal.org")
    (setq org-journal-date-format "%Y-%m-%d")

    (setq org-journal-dir "~/Dropbox/org/"))

  (setq nov-text-width 80)
  (setq nov-variable-pitch nil)

  (eval-after-load 'magit-popup
    '(magit-define-popup-switch 'magit-log-popup
      ?m "Omit merge commits" "--no-merges")))

(custom-set-variables
 ;; custom-set-variables was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 '(evil-want-Y-yank-to-eol t)
 '(package-selected-packages
   (quote
    (powerline purescript-mode prettier-js pcre2el org-category-capture org-plus-contrib org-mime mu4e-maildirs-extension mu4e-alert alert log4e gntp skewer-mode simple-httpd json-snatcher json-reformat js2-mode parent-mode projectile request haml-mode gmail-message-mode ham-mode html-to-markdown gitignore-mode fringe-helper git-gutter+ git-gutter gh marshal logito pcache ht flyspell-correct flymd pos-tip flycheck flx magit magit-popup git-commit ghub treepy graphql with-editor smartparens iedit anzu evil goto-chg undo-tree edit-server diminish web-completion-data dash-functional tern go-mode ghc haskell-mode anaconda-mode pythonic company hydra inflections edn multiple-cursors paredit peg eval-sexp-fu highlight cider sesman spinner queue pkg-info clojure-mode epl markdown-mode rust-mode inf-ruby bind-map bind-key yasnippet packed f s helm avy helm-core async auto-complete popup xkcd yapfify yaml-mode xterm-color ws-butler wolfram-mode winum which-key web-mode web-beautify volatile-highlights vi-tilde-fringe uuidgen use-package unfill toml-mode toc-org thrift tagedit stan-mode sql-indent spaceline solarized-theme smeargle slim-mode shell-pop scss-mode scad-mode sass-mode rvm ruby-tools ruby-test-mode rubocop rspec-mode robe rjsx-mode restart-emacs rbenv rake rainbow-delimiters racer qml-mode pyvenv pytest pyenv-mode py-isort puppet-mode pug-mode psci psc-ide popwin pip-requirements persp-mode paradox ox-twbs orgit org-projectile org-present org-pomodoro org-download open-junk-file notmuch neotree mwim multi-term move-text mmm-mode minitest matlab-mode markdown-toc magit-gitflow magit-gh-pulls macrostep lua-mode lorem-ipsum livid-mode live-py-mode linum-relative link-hint less-css-mode julia-mode json-mode js2-refactor js-doc jinja2-mode intero insert-shebang info+ indent-guide hy-mode hungry-delete htmlize hlint-refactor hl-todo hindent highlight-parentheses highlight-numbers highlight-indentation hide-comnt help-fns+ helm-themes helm-swoop helm-pydoc helm-projectile helm-mode-manager helm-make helm-hoogle helm-gitignore helm-flx helm-descbinds helm-css-scss helm-company helm-c-yasnippet helm-ag haskell-snippets google-translate golden-ratio go-guru go-eldoc gnuplot github-search github-clone github-browse-file gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link git-gutter-fringe git-gutter-fringe+ gist gh-md fuzzy flyspell-correct-helm flycheck-rust flycheck-pos-tip flycheck-haskell flx-ido fish-mode fill-column-indicator fancy-battery eyebrowse expand-region exec-path-from-shell evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-magit evil-lisp-state evil-indent-plus evil-iedit-state evil-exchange evil-escape evil-ediff evil-args evil-anzu eslintd-fix eshell-z eshell-prompt-extras esh-help emmet-mode elm-mode elisp-slime-nav dumb-jump disaster diff-hl define-word cython-mode company-web company-tern company-statistics company-shell company-go company-ghci company-ghc company-cabal company-c-headers company-ansible company-anaconda column-enforce-mode coffee-mode cmm-mode cmake-mode clojure-snippets clj-refactor clean-aindent-mode clang-format cider-eval-sexp-fu chruby cargo bundler auto-yasnippet auto-highlight-symbol auto-dictionary auto-compile arduino-mode ansible-doc ansible aggressive-indent add-node-modules-path adaptive-wrap ace-window ace-link ace-jump-helm-line ac-ispell)))
 '(psc-ide-add-import-on-completion t t)
 '(psc-ide-rebuild-on-save nil t))
(custom-set-faces
 ;; custom-set-faces was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 )
(defun dotspacemacs/emacs-custom-settings ()
  "Emacs custom settings.
This is an auto-generated function, do not modify its content directly, use
Emacs customize menu instead.
This function is called at the very end of Spacemacs initialization."
(custom-set-variables
 ;; custom-set-variables was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 '(evil-want-Y-yank-to-eol t)
 '(package-selected-packages
   (quote
    (yasnippet-snippets writeroom-mode vterm treemacs-projectile treemacs-magit treemacs-evil tide typescript-mode symbol-overlay org-brain org-ql ov org-super-agenda ts ob-restclient nodejs-repl lsp-ui lsp-python-ms lsp-haskell json-navigator hoon-mode helm-xref helm-rtags helm-org helm-ls-git groovy-mode forge closql flycheck-rtags flycheck-ledger flycheck-elsa evil-org evil-goggles reformatter editorconfig ebuild-mode dockerfile-mode docker tablist dap-mode dante csv-mode company-rtags rtags ccls browse-at-remote blacken attrap ledger-mode lsp-mode transient all-the-icons memoize treemacs pfuture dash dotenv-mode lv powerline purescript-mode prettier-js pcre2el org-category-capture org-plus-contrib org-mime mu4e-maildirs-extension mu4e-alert alert log4e gntp skewer-mode simple-httpd json-snatcher json-reformat js2-mode parent-mode projectile request haml-mode gmail-message-mode ham-mode html-to-markdown gitignore-mode fringe-helper git-gutter+ git-gutter gh marshal logito pcache ht flyspell-correct flymd pos-tip flycheck flx magit magit-popup git-commit ghub treepy graphql with-editor smartparens iedit anzu evil goto-chg undo-tree edit-server diminish web-completion-data dash-functional tern go-mode ghc haskell-mode anaconda-mode pythonic company hydra inflections edn multiple-cursors paredit peg eval-sexp-fu highlight cider sesman spinner queue pkg-info clojure-mode epl markdown-mode rust-mode inf-ruby bind-map bind-key yasnippet packed f s helm avy helm-core async auto-complete popup xkcd yapfify yaml-mode xterm-color ws-butler wolfram-mode winum which-key web-mode web-beautify volatile-highlights vi-tilde-fringe uuidgen use-package unfill toml-mode toc-org thrift tagedit stan-mode sql-indent spaceline solarized-theme smeargle slim-mode shell-pop scss-mode scad-mode sass-mode rvm ruby-tools ruby-test-mode rubocop rspec-mode robe rjsx-mode restart-emacs rbenv rake rainbow-delimiters racer qml-mode pyvenv pytest pyenv-mode py-isort puppet-mode pug-mode psci psc-ide popwin pip-requirements persp-mode paradox ox-twbs orgit org-projectile org-present org-pomodoro org-download open-junk-file notmuch neotree mwim multi-term move-text mmm-mode minitest matlab-mode markdown-toc magit-gitflow magit-gh-pulls macrostep lua-mode lorem-ipsum livid-mode live-py-mode linum-relative link-hint less-css-mode julia-mode json-mode js2-refactor js-doc jinja2-mode intero insert-shebang info+ indent-guide hy-mode hungry-delete htmlize hlint-refactor hl-todo hindent highlight-parentheses highlight-numbers highlight-indentation hide-comnt help-fns+ helm-themes helm-swoop helm-pydoc helm-projectile helm-mode-manager helm-make helm-hoogle helm-gitignore helm-flx helm-descbinds helm-css-scss helm-company helm-c-yasnippet helm-ag haskell-snippets google-translate golden-ratio go-guru go-eldoc gnuplot github-search github-clone github-browse-file gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link git-gutter-fringe git-gutter-fringe+ gist gh-md fuzzy flyspell-correct-helm flycheck-rust flycheck-pos-tip flycheck-haskell flx-ido fish-mode fill-column-indicator fancy-battery eyebrowse expand-region exec-path-from-shell evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-magit evil-lisp-state evil-indent-plus evil-iedit-state evil-exchange evil-escape evil-ediff evil-args evil-anzu eslintd-fix eshell-z eshell-prompt-extras esh-help emmet-mode elm-mode elisp-slime-nav dumb-jump disaster diff-hl define-word cython-mode company-web company-tern company-statistics company-shell company-go company-ghci company-ghc company-cabal company-c-headers company-ansible company-anaconda column-enforce-mode coffee-mode cmm-mode cmake-mode clojure-snippets clj-refactor clean-aindent-mode clang-format cider-eval-sexp-fu chruby cargo bundler auto-yasnippet auto-highlight-symbol auto-dictionary auto-compile arduino-mode ansible-doc ansible aggressive-indent add-node-modules-path adaptive-wrap ace-window ace-link ace-jump-helm-line ac-ispell)))
 '(psc-ide-add-import-on-completion t t)
 '(psc-ide-rebuild-on-save nil t))
(custom-set-faces
 ;; custom-set-faces was added by Custom.
 ;; If you edit it by hand, you could mess it up, so be careful.
 ;; Your init file should contain only one such instance.
 ;; If there is more than one, they won't work right.
 )
)